!REDIRECT “https://docs.px4.io/master/ja/middleware/modules_driver_airspeed_sensor.html“

Modules Reference: Airspeed Sensor (Driver)

ets_airspeed

Source: drivers/differential_pressure/ets

Usage

  1. ets_airspeed <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  7.                  (default=1))
  8.      [-f <val>]  bus frequency in kHz
  9.      [-q]        quiet startup (no message if no device found)
  11.    stop
  13.    status        print status info

ms4525_airspeed

Source: drivers/differential_pressure/ms4525

Usage

  1. ms4525_airspeed <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  7.                  (default=1))
  8.      [-f <val>]  bus frequency in kHz
  9.      [-q]        quiet startup (no message if no device found)
  10.      [-T <val>]  Device type
  11.                  values: 4525|4515, default: 4525
  13.    stop
  15.    status        print status info

ms5525_airspeed

Source: drivers/differential_pressure/ms5525

Usage

  1. ms5525_airspeed <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  7.                  (default=1))
  8.      [-f <val>]  bus frequency in kHz
  9.      [-q]        quiet startup (no message if no device found)
  11.    stop
  13.    status        print status info

sdp3x_airspeed

Source: drivers/differential_pressure/sdp3x

Usage

  1. sdp3x_airspeed <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  7.                  (default=1))
  8.      [-f <val>]  bus frequency in kHz
  9.      [-q]        quiet startup (no message if no device found)
  10.      [-a <val>]  I2C address
  11.                  default: 33
  12.      [-k]        if initialization (probing) fails, keep retrying periodically
  14.    stop
  16.    status        print status info