!REDIRECT “https://docs.px4.io/master/ko/middleware/modules_driver_baro.html“

모듈 참고: 기압(드라이버)

bmp280

Source: drivers/barometer/bmp280

Usage

  1. bmp280 <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  15.      [-a <val>]  I2C address
  16.                  default: 118
  18.    stop
  20.    status        print status info

bmp388

Source: drivers/barometer/bmp388

Usage

  1. bmp388 <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  15.      [-a <val>]  I2C address
  16.                  default: 118
  18.    stop
  20.    status        print status info

dps310

Source: drivers/barometer/dps310

Usage

  1. dps310

lps22hb

Source: drivers/barometer/lps22hb

Usage

  1. lps22hb <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  16.    stop
  18.    status        print status info

lps25h

Source: drivers/barometer/lps25h

Usage

  1. lps25h <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  16.    stop
  18.    status        print status info

lps33hw

Source: drivers/barometer/lps33hw

Usage

  1. lps33hw <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  15.      [-a <val>]  I2C address
  16.                  default: 93
  17.      [-k]        if initialization (probing) fails, keep retrying periodically
  19.    stop
  21.    status        print status info

mpl3115a2

Source: drivers/barometer/mpl3115a2

Usage

  1. mpl3115a2 <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  7.                  (default=1))
  8.      [-f <val>]  bus frequency in kHz
  9.      [-q]        quiet startup (no message if no device found)
  11.    stop
  13.    status        print status info

ms5611

Source: drivers/barometer/ms5611

Usage

  1. ms5611 <command> [arguments...]
  2.  Commands:
  3.    start
  4.      [-I]        Internal I2C bus(es)
  5.      [-X]        External I2C bus(es)
  6.      [-s]        Internal SPI bus(es)
  7.      [-S]        External SPI bus(es)
  8.      [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
  9.                  (default=1))
  10.      [-c <val>]  chip-select index (for external SPI)
  11.                  default: 1
  12.      [-m <val>]  SPI mode
  13.      [-f <val>]  bus frequency in kHz
  14.      [-q]        quiet startup (no message if no device found)
  15.      [-T <val>]  Device type
  16.                  values: 5607|5611, default: 5611
  18.    stop
  20.    status        print status info